- Home page /
- Technologies /
- Our publications about technologies
Our publications about technologies
-
01.10.2014
Fracturing Technologies Diminishing The Risks Of Well Watering
Fracturing process is one of the most demanded methods of production enhancement. Its success depends on many factors like the composition of the formation, the state of the well, the selected fracturing technologies, the quality of fracturing fluid. More»
-
01.10.2014
New available ways to increase oil and gas well productivity using coiled tubing without resorting to standard engineering solutions for well recovery
If we descended to the hole bottom, we wouldat once understand why at a wide perforation range (often more than 50 or 200 m) attenuation of the well rate takes place. More»
-
01.10.2014
Determination оf the Fluid Flow Pattern During Well Workover Using Coiled Tubing
This article describes a method to determine hydraulic losses in the circulation system of the coiled tubing rig. The main parameters governing the fluid flow pattern in the coiled tubing and their relation have been identified. More»
-
01.10.2014
Coiled Tubing in Anticipation of New High Technologies
It seems that the Russian coiled tubing market started growing in 1998–1999 when the first CT units appeared in the country. More»
-
05.09.2014
Jereh’s Principles of Success
Coiled Tubing Times’ correspondent interviewed Mr. Forrest Wang, Vice-President of Jereh Oilfield Services Group Company. The interview was facilitated by Ms. Nadia Zhong, the company’s Deputy General Sales Manager. The interview took place... More»
-
01.05.2014
Coiled tubing-assisted surface-controlled hydraulic fracturing
The proposed hydraulic fracturing technique will allow increasing the earning capacity of oil and gas producing companies, both domestic and foreign, and covering the costs associated with the use of such an expensive method of well stimulation. More»
-
01.05.2014
Multi-stage hydraulic fracturing using coiled tubing and TriFrac-C™ fluid system
For the last few years progress in the area of hydraulic fracturing in horizontal sections of the well has dramatically stepped forward and Trican Well Service contributed significantly to the development and improvement of these technologies. More»
-
01.05.2014
First Steps of Channel Fracturing in Russia Set New Directions for Production Increase of the Oil Fields
Channel fracturing technique changes the concept of proppant fracture conductivity generation by enabling hydrocarbons to flow through open channels instead of the proppant pack. More»
-
01.05.2014
Multistage frac ports milling solutions on wireline. The first in the CIS
Conventional multistage frac port seat drill out technologies require large amounts of fluid to be pumped into the wellbore for downhole motor activation in case if tubing or coiled tubing is used. More»
-
01.05.2014
The avenues of developing hydraulic fracturing and acid hydraulic fracturing on the fields of the Republic of Belarus
RUE Belorusneft Production Association adopted a modernization strategy for 2011–2016 aimed at improving current technological approaches to hydraulic fracturing and acid hydraulic fracturing operations planning and support, introduction and... More»
-
24.12.2021
Gazprom Neft, Skoltech and the Khanty-Mansi autonomous okrug-Yugra are developing technologies to produce hard-to-recover oil
-
17.12.2021
Gazprom neft establishes Russia’s first test facilities for developing hard-to-recover oil production technologies
-
25.11.2021
LUKOIL successfully tries out casing drilling
-
08.11.2021
Gazprom Neft and Gazprom Burenie to support the development of Russia’s first oil- and gas-well drilling robot